Got a multi-axis motion control project on your hands? You’ll want to take a look at the Allen Bradley 2094-BC02-M02-M. It’s built for exactly those high-dynamic scenarios, with independent dual-axis drive that keeps things moving smoothly.
As a go-to supplier, we’ve got brand new units in stock at Hanyite Automation Technology. That means you don’t have to wait around for lead times. It uses a DC bus power setup and dual-port EtherNet/IP to keep data stable. Way more compact than using separate drives, it saves a ton of cabinet space, and the safety torque cutoff gives you that extra peace of mind on the floor.
The Allen Bradley 2094-BC02-M02-M is responsible for dual-axis independent servo control, capable of precisely executing the speed and position commands for two motors simultaneously.
It comes with a built-in safety torque shutdown function, which can quickly cut off the power output in case of an emergency, ensuring the safety of the on-site equipment.
It supports high-resolution feedback signal processing, with extremely fast closed-loop response and very low motion control delay.
This module adopts a compact structure design, which takes up very little space in the electrical cabinet and is easy to disassemble, assemble and connect.
The front panel has status indicator lights, and by looking at the red and yellow lights, you can immediately tell whether the Allen Bradley 2094-BC02-M is running normally or not, saving a lot of time for troubleshooting.
The connection terminals are standardized, with a low error rate in wiring, and it is also convenient for on-site rewiring.
It is a natural match with Rockwell's Logix system. With the Studio 5000 software, all the logic and motion control can be completed in one software, without the need to switch between environments.
It can run on ControlNet or EtherNet/IP buses. The Allen Bradley 2094-BC02-M can directly integrate into the existing architecture, and the configuration labels are very simple.
Third-party motors can also be used as a compromise, leaving room for upgrading old equipment.
The upper-level controller issues instructions → Allen Bradley 2094-BC02-M02-M receives and parses them → The internal power module outputs current → The servo motor rotates → The encoder sends back the position signal → The driver completes closed-loop adjustment.
Address
No. 169, Xinggang 2nd Li, Haicang District, Xiamen, China
Tel
