In the space-constrained electrical control cabinet, it is necessary to streamline the terminal monitoring nodes. The Allen Bradley 2711-K5A5L3 is equipped with a 5-inch monochrome display and physical buttons. Compared to traditional touch devices, operators wearing thick gloves can also precisely trigger instructions. The device is powered by 24V DC and integrates the DH-485 dedicated communication interface. No additional protocol conversion module is required, and it can directly connect to the SLC500 controller architecture, significantly shortening the production line renovation cycle. Through Hanyite Automation Technology's connection with the factory for wholesale procurement, these complete machines are all brand-new in stock and can interact stably and be quickly put into operation under harsh conditions.
| Display: | 5-inch monochrome LCD at 128x64 resolution, delivering clear text and bitmap data. |
| Keypad: | Rugged membrane keys (function + numeric) on the lower panel, designed for gloved hands and blind presses. |
| Comms: | Standard DH-485 port on the rear for direct, reliable connection to SLC500 and MicroLogix controllers. |
| Power: | 24V DC wide-voltage input with integrated surge and EMI protection, ensuring steady operation through grid fluctuations. |
This terminal ensures the I/O status of the underlying controller is refreshed at the millisecond level through a low-latency polling mechanism, and the command issuance response is agile. The built-in DH-485 communication link in Allen Bradley 2711-K5A5L3 has extremely strong bus addressing capabilities. In a single network segment, multiple nodes can be connected without additional relayers, significantly simplifying the wiring topology of the distributed production line. Its dedicated configuration software provides intuitive label mapping logic, making alarm priority setting and multi-screen switching logic deployment more efficient, providing a hard-core and economical interaction path for lightweight operation nodes.
Before leaving the factory, the entire machine must undergo mandatory analog load aging tests. It operates continuously in an extreme temperature chamber to eliminate potential early failures. The communication ports have undergone thousands of plug-and-unplug fatigue tests to ensure the physical tightness of the on-site wiring terminals is not affected by frequent maintenance. The internal circuit board of Allen Bradley 2711-K5A5L3 is fully coated with three-layer anti-corrosion paint, combined with a high-strength shell injection molding process, blocking the corrosion of dust and moisture on the precise wiring. Strict electrical withstand voltage and insulation resistance detection standards have constructed the bottom line for the equipment's long-term trouble-free operation.
The operating temperature range covers from minus twenty to sixty-five degrees Celsius. The LCD display has no ghosting in extreme cold or hot workshops, and the logic execution of the main control chip has no lag.
The front panel sealing design reaches IP65 protection level, effectively blocking the intrusion of fine dust and high-pressure water jets, and the internal circuitry is protected from erosion in humid and dusty conditions.
The internal hardware isolation architecture and metal shielding layer work together, ensuring stable data interaction without packet loss in a strong electromagnetic interference and variable frequency harmonic environment.
The vibration resistance indicators of the Allen Bradley 2711-K5A5L3 comply with industrial mechanical shock standards, capable of withstanding continuous low-frequency vibration and occasional mechanical impacts on the production line, and the structural connection remains firm and not loose.
Address
No. 169, Xinggang 2nd Li, Haicang District, Xiamen, China
Tel
