If the screen is too slippery and difficult to fix, you'll need to get a "metal frame". In simple terms, the Allen Bradley 2711P-RDK10C is not the screen; it's an iron mounting frame with clasps and screws, specifically designed for the PanelView Plus 700 to 1000 series color screens. Just insert it into the back of the control cabinet door and the screen will be securely fastened. Even if the machines in the workshop shake violently, it won't budge. When buying this type of fixing piece, it's crucial to find a reliable seller. Hanyite Automation Technology ships directly from stock, ensuring originality and making it easy for you to purchase.
As we engineers know, the worst situation is "all preparations are in place, only the wind is lacking". Sometimes during equipment renovation, the screens are purchased, and the cabinet doors have the holes drilled. But when it comes to installation, it turns out that the brackets are missing, causing the screens to hang in the air without a place to be fixed. This is quite embarrassing. If you have to go and make a metal frame yourself, even if the size is slightly off, when it's installed, it will either be tilted or shake, or even crack the screen casing. This would be even more troublesome. Sometimes the brackets removed from the old equipment are in such a bad condition that they are rusty or the screws have slipped, making them completely unusable for reuse. This Allen Bradley 2711P-RDK10C model is specifically designed to solve these worrying problems. You don't need to do electric welding or machine processing yourself, nor do you have to worry about the size not matching. Just bring it here and it can be used directly. Not only does it save you the time of searching for spare parts everywhere, but it also ensures a firm installation, making you worry-free and saving you effort.
This kit is specially designed by Allen Bradley for the PanelView Plus 700 and 1000 series. Allen Bradley 2711P-RDK10C is highly versatile. No matter what specific model of terminal you have at hand, as long as it belongs to these two size series, it can basically fit perfectly. Regarding integration, it uses very standard industrial installation logic. There are pre-designed DIN rail slots behind the frame and also screw-fixed holes. You can choose the method that is most convenient for you. The most important thing is that its compatibility with the HMI is at the factory-level perfect fit. After installation, the power port and communication port under the screen can be precisely exposed at the opening of the cabinet door, and it will not be blocked by the frame due to its inappropriate size, or the screen will not be installed smoothly, looking ugly and unsafe.
Q1. The old frame in my current cabinet was fixed by welding. Do I need to use gas welding to cut off the old one when replacing this new shelf?
A: If your previous shelf was indeed welded together, then you really need to find a way to dismantle it destructively. But after installing this Allen Bradley 2711P-RDK10C, there will be no need for welding anymore. It can be directly fixed with a fixture, and maintenance and disassembly will be a hundred times easier in the future.
Q2. Besides being hung on the wall or cabinet door, can this rack be directly installed on the tabletop of the operation counter?
A: Structurally speaking, it is a square hole insert. If there is a square hole of the corresponding size on your operation console panel, it can be completely embedded and fixed on the desktop.
Q3. When purchasing, do I need to provide the serial number or order number of the equipment to confirm any information?
A: As long as you confirm that the screen in your hand is of the PanelView Plus 700 to 1000 series, you can directly purchase the model. There is no need to check the serial number on the back of the screen, which is very convenient.
Address
No. 169, Xinggang 2nd Li, Haicang District, Xiamen, China
Tel
